English

A234WPB ANSI B16.9 Pipe Fitting Elbow Indololwane Ingxube Yensimbi Indololwane/I-Pipe Bend 45/90 Degree Elbows

A234WPB ANSI B16.9 Pipe Fitting Elbow Indololwane Ingxubevange yensimbi Indololwane/Pipe Bend 45/90 Degree Izindololwane Isithombe Esifakiwe
  • A234WPB ANSI B16.9 Pipe Fitting Elbow Indololwane Ingxube Yensimbi Indololwane/I-Pipe Bend 45/90 Degree Elbows
  • A234WPB ANSI B16.9 Pipe Fitting Elbow Indololwane Ingxube Yensimbi Indololwane/I-Pipe Bend 45/90 Degree Elbows
  • A234WPB ANSI B16.9 Pipe Fitting Elbow Indololwane Ingxube Yensimbi Indololwane/I-Pipe Bend 45/90 Degree Elbows
  • A234WPB ANSI B16.9 Pipe Fitting Elbow Indololwane Ingxube Yensimbi Indololwane/I-Pipe Bend 45/90 Degree Elbows
  • A234WPB ANSI B16.9 Pipe Fitting Elbow Indololwane Ingxube Yensimbi Indololwane/I-Pipe Bend 45/90 Degree Elbows
  • A234WPB ANSI B16.9 Pipe Fitting Elbow Indololwane Ingxube Yensimbi Indololwane/I-Pipe Bend 45/90 Degree Elbows

Incazelo emfushane:

Igama: I-alloy Steel Elbow
Okujwayelekile: ANSI B16.9,MSS SP 75
Material: ASTM A234 WP22/WP11/WP5/WP9/WP91/16Mo3


  • Umbala:emnyama noma evarnished
  • Qeda:ukuphela kwe-bevel
    • Landa njenge-PDF

    Imininingwane Yomkhiqizo

    IMIPHAKATHI YOMKHIQIZO

    Igama Lomkhiqizo Indololwane yepayipi
    Usayizi 1/2"-36" indololwane engenamthungo(indololwane ye-SMLS), 26"-110" eshiselwe ngomthungo.Ububanzi obukhulu bangaphandle bungaba ngu-4000mm
    Okujwayelekile ANSI B16.9, EN10253-2, DIN2605, GOST17375-2001, JIS B2313, MSS SP 75, njll.
    Ukujiya kodonga STD, XS, XXS, SCH20,SCH30,SCH40, SCH60, SCH80, SCH160, XXS nokunye.
    Iziqu 30° 45° 60° 90° 180°, njll
    Irediyasi LR/irediyasi ende/R=1.5D,SR/Irediyasi emfushane/R=1D
    Qeda I-Bevel end/BE/buttweld
    Ubuso umbala wemvelo, i-varnished, umdwebo omnyama, uwoyela ophikisana nokugqwala njll.
    Okubalulekile Insimbi ye-Carbon:I-A234WPB, A420 WPL6 St37,St45, E24, A42CP, 16Mn, Q345, P245GH,P235GH, P265GH, P280GH, P295GH, P355GH njll.
      Insimbi yepayipi:ASTM 860 WPHY42, WPHY52, WPHY60, WPHY65,WPHY70, WPHY80 nokunye.
      Insimbi ye-Cr-Mo ingxubevange:I-A234 WP11, WP22, WP5, WP9, WP91, 10CrMo9-10, 16Mo3 , 12crmov, njll.
    Isicelo Imboni ye-petrochemical;imboni yezindiza kanye ne-aerospace;imboni yezemithi,i-gas exhaust;isikhungo sikagesi;isakhiwo somkhumbi;ukwelashwa kwamanzi, njll.
    Izinzuzo isitoko esilungile, isikhathi sokulethwa esisheshayo; sitholakala kuwo wonke amasayizi, enziwe ngokwezifiso; ikhwalithi ephezulu

    UKUFAKELWA KWAMAPHOPHA

    Ukufakwa kwepayipi elishiselwe izinqe kuhlanganisa indololwane yepayipi lensimbi, i-steel pipe tee, i-steel pipe reduer, ikepisi yepayipi lensimbi.Zonke lezo butt welding pipe nokufakwa, singakwazi ukuhlinzeka ndawonye, ​​sineminyaka engaphezu kwengu-20 nakho ukukhiqiza.

    Uma unentshisekelo yokunye ukufakwa, sicela uchofoze kulandelwe LINK ukuze uhlole imininingwane.

     I-PIPE TEE                                I-PIPE REDUCER                            I-PIPE CAP                                        I-PIPE GOBA                                     IZINTO EZIFAKELWE

    IBHAYIBHANA ELISHISHISELWE IBHAYIBHANA

    Indololwane yepayipi lensimbi iyizingxenye ezibalulekile ohlelweni lwamapayipi ukuze kushintshwe indlela yokugeleza koketshezi.Isetshenziselwa ukuxhuma amapayipi amabili anobubanzi obufanayo noma obuhlukile, nokwenza ipayipi iphendukele ohlangothini oluthile lwama-degree angu-45 noma angu-90.

    Ngendololwane yepayipi yezimboni, uhlobo lokugcina lwe-connectin luyi-butt weld, ngokusho kwe-ANSI B16.25.Izinqe ezishiselwe zingachaza i-butt welding, i-buttweld, i-bevel end.BW

    UHLOBO LWENDLOVU

    Indololwane ingahlukaniswa ukusuka ku-engeli yokuqondisa, izinhlobo zokuxhuma, ubude ne-radius, izinhlobo zezinto ezibonakalayo.

    Kuhlukaniswa nge-Direction Angle

    Njengoba sazi, ngokusho kwesiqondiso samanzi samapayipi, indololwane ingahlukaniswa ngamadigri ahlukene, njenge-45 degree, 90 degree, 180 degree, okuyiziqu ezivame kakhulu.Futhi kukhona i-60 degree kanye ne-120 degree, kwamanye amapayipi akhethekile.

    Ngendololwane engu-90 degree, iphinde ichazwe ngendololwane engu-90d, noma indololwane engu-90 deg.

    Iyini i-Elbow Radius

    Irediyasi yendololwane isho irediyasi yokugoba.Uma irediyasi ifana nobubanzi bepayipi, ibizwa ngokuthi indololwane yerediyasi emfushane, ebizwa nangokuthi indololwane ye-SR, ngokuvamile ngomfutho ophansi kanye namapayipi anejubane eliphansi.

    Uma irediyasi inkulu kunobubanzi bepayipi, R ≥ 1.5 Diameter, khona-ke siyibiza ngokuthi indololwane ye-radius ende (LR Elbow), esetshenziselwa ukucindezela okuphezulu namapayipi okugeleza okuphezulu.

    Uma irediyasi ingaphezu kuka-1.5D, njalo ibizwa ngokuthi ukugoba.ukufakwa kwepayipi lokugoba indololwane.Okufana nendololwane engu-2d, ukugoba okungu-2, indololwane engu-3d, ukugoba okungu-3d, njll.

    Ukuhlukaniswa ngokwezinto ezibonakalayo

    Insimbi ye-Carbon, ebizwa nangokuthi insimbi emnene noma insimbi emnyama.Njenge-ASTM A234 WPB

    Uma ufuna izindololwane zensimbi engagqwali, sicela uchofoze lesi sixhumanisi ukuze uthole imininingwane eyengeziwe:IZIndololwane Zensimbi Engagqwali

    Uhlobo Lomumo

    Kungaba indololwane elinganayo noma Ukunciphisa indololwane

    UBUSE BENDLOVU

    I-Sand Blast

    Ngemuva kokwakhiwa okushisayo, sihlela ukuqhuma kwesihlabathi ukuze senze ubuso buhlanzeke futhi bushelelezi.

    Ngemva kokuqhuma kwesihlabathi, ukuze kugwenywe ukugqwala, kufanele kwenziwe umdwebo omnyama noma uwoyela ovimbela ukugqwala, i-Hot dip galvanized (HDG) , i-epoxy, i-3PE, indawo enyamalele, njll. Lokho kuncike esicelweni sekhasimende.

    UKWELASHWA OKUSHISA

    1. Gcina isampula lempahla eluhlaza ukuze uyilandele.
    2. Hlela ukwelashwa kokushisa ngokwendinganiso ngokuqinile.

    UKUMAKA

    Umsebenzi wokumaka ohlukahlukene, ungagoba, upende, ulebuli.Noma ngesicelo sakho.Siyakwamukela ukumaka I-LOGO yakho.

    5

    5

    IZITHOMBE EZINEMINININGWANE

    1. Ukuphela kwe-bevel njengokusho kwe-ANSI B16.25.

    2. Ukuqhuma kwesihlabathi kuqala, bese kuba umsebenzi ophelele wokupenda.Kungenziwa futhi nge-varnish.

    3. Ngaphandle kwe-lamination kanye nemifantu.

    4. Ngaphandle kokulungiswa kwe-weld.

    5

    UKUHLOLA

    1. Izilinganiso zobukhulu, zonke zingaphakathi kokubekezelelana okujwayelekile.

    2. Ukubekezelela ukuqina:+/-12.5% ​​, noma ngokwesicelo sakho

    3. I-PMI

    4. MT, UT, X-ray test

    5. Yamukela ukuhlolwa komuntu wesithathu

    6. Faka isitifiketi se-MTC, EN10204 3.1/3.2

    5

    5

    UKUPAKASHA NOKUTHUMELA

    1. Ipakishwe ngekesi le-plywood noma i-plywood pallet ngokwe-ISPM15

    2. sizobeka uhlu lokupakisha kuphakheji ngayinye

    3. sizofaka izimpawu zokuthumela kuphakheji ngayinye.Amagama omaka asesicelweni sakho.

    4. Zonke izinto zephakeji lezinkuni azifuzi mahhala

    FAQ

    1. Kuyini ukwakheka impahla 12crmov carbon steel indololwane?

    2. Ingabe i-16mn 06cr19ni Q235 Q234 indololwane ingasetshenziswa ekushiseni okuphezulu nasekufakweni kwengcindezi ephezulu?

    3. Ithini indawo yokugoba yendololwane engu-16mo3?

    4. Yiziphi izici ezibalulekile zendololwane engu-16mo3?

    5. Uyini umehluko phakathi kwendololwane engu-90° kanye nendololwane ye-radius emfushane engu-90°?

    6. Yiziphi izinhlelo zokusebenza zezindololwane ezingama-90-degree?

    7. Indololwane ye-sandblasting engu-90-degree iqhathaniswa kanjani nendololwane evamile engu-90-degree?

    8. Yiziphi izici zendololwane/indololwane engu-90 degree?

    9. Yiziphi izinzuzo zokusebenzisa indololwane engu-90 degree?

    10. Ingabe indololwane engu-90 degree ingamelana nezindawo ezonakalisayo?

  • Okwedlule:
  • Olandelayo:

    • IMIKHIQIZO EHLOBANE